1. Introduction
This product is a profession handheld non-contact infrared thermometer ftor household use, which can effectively reduce the bacteria Fork infection. There are two measurement modes: BOYD and SCAN, which can be used to measure animal temperature, environment and impact, Adjust the temperature of milk powder and water.
2. Feature
a. Non-contact high-precision temperature measurement
b. LCD display with backlight
c. Automatic range selection for each resolution 0.1°C(0.1°F)
d. Automatic shutdown function
e. Automatic data retention
3. Security clause
a. Please read this manual carefully before use
b. Please use this product at an ambient temperature of 10°C to 40°C
c. Please do not place this product near live abjects to avoid electric shock
d. Please do not use in the environment with relative humidity greater than 85%
e. When cleaning is required gently wipe the surface of the meter with alcohol
f. If there is a problem with the meter, contact your distributor and do not attempt to repair it yourself.
4. Instruction for use
4.1 Precautions before use
a. When the room temperature changes greatly, the thermometer should be placed in the room for 10 to 20 minutes before use, Get more reliable and stable measurement values
b. Measurements will vary depending on the animal's fur and thickness
c. Do not expose this product to the sun or touch it with water
Important: When measuring body temperature, make sure to remove your hair and dry your sweat
5. Technical index
6.Instructions
6.1. Measurement steps
6.1.1 The battery is installed.
6.1.2 Hold the handle of the meter and point the infrared sensor at the object
to be measured, distance 3-5cm. Hold the measurement switch,The meter
emits a "drop"; indicating that the meter is finished measuring.
6.1.3Release the measurement switch to read the temperature of the measured object.
Measurement Note: If the ambient temperature of the thermometer changes
drastically, it will affect the accuracy of the thermometer Temperature, wait
10 to 20 minutes at the new ambient temperature before measuring). When
measuring, make sure Keep your hair away and dry your sweat
7. Battery replacement
7.1 When the battery power is low, the LCD screen will display
7.2 At this time, the instrument needs an updated 7th battery.
7.3 Open the battery cover, take out the old battery, put in a new AAA battery,
and close the battery cover as it is.
8. Product keeper
8.1 Regularly wipe the meter with a dry cotton cloth. Never use any solvent to clean it.
8.2 Product must be serviced by professionals
8.3 Never put the instrument in water
8.4 Do not store in high temperature and high humidity environments.
9. Common problem
9.1 The LCD shows "HI"analysts and the measured value exceeds the
measurement range, that is, it exceeds 42.5 °C / 108.5°F in "BODV" mode, and
exceeds 265°C / 509°F in "SCAN" mode.
9.2 The LCD displays "LO"analysis, and the measured valve is beyond the
measurement range, that is, below 32°C / 0°F in "BODV" mode .Below -50 °C/
-48°F in "SCAN" mode.
This product is a profession handheld non-contact infrared thermometer ftor household use, which can effectively reduce the bacteria Fork infection. There are two measurement modes: BOYD and SCAN, which can be used to measure animal temperature, environment and impact, Adjust the temperature of milk powder and water.
2. Feature
a. Non-contact high-precision temperature measurement
b. LCD display with backlight
c. Automatic range selection for each resolution 0.1°C(0.1°F)
d. Automatic shutdown function
e. Automatic data retention
3. Security clause
a. Please read this manual carefully before use
b. Please use this product at an ambient temperature of 10°C to 40°C
c. Please do not place this product near live abjects to avoid electric shock
d. Please do not use in the environment with relative humidity greater than 85%
e. When cleaning is required gently wipe the surface of the meter with alcohol
f. If there is a problem with the meter, contact your distributor and do not attempt to repair it yourself.
4. Instruction for use
4.1 Precautions before use
a. When the room temperature changes greatly, the thermometer should be placed in the room for 10 to 20 minutes before use, Get more reliable and stable measurement values
b. Measurements will vary depending on the animal's fur and thickness
c. Do not expose this product to the sun or touch it with water
Important: When measuring body temperature, make sure to remove your hair and dry your sweat
5. Technical index
| Measuring range | BOYD: 32.0°C- 42.9°C(89.6°F- 109-2°F) |
| SCAN: 0°C~50°C( 32°F~122°F) | |
| Note: Low temperature is higher than 37.2°C / 98.9°F . It is only used for quick troubleshooting and is not used as a basis for other purposes ♦ LCD display with backlight | |
| Fever reminder | Orange 37 4°C<=T<=37.9°C(99.3°F ~100.2°F) |
| Red 38°C<=T<=42.9°C(100.4°F~109.2°F) | |
| Resolution | 0.1°C/0.1°F |
| Measuring distance | 3~5cm |
| Operating ambient temperature | 10°C-40°C(50°F~104°F) |
| Relative humidity | <85% |
| Automatic shut-down | Turns off automatically after about 30 seconds |
| power supply | 7th battery |
| weight | Approximately 126g |
| size (L*W*H) | 77mm X 43mm X 149_ |
| Note: Accuracy is obtained at an ambient temperature of 18°C~28°C / 64°F ~B2°F | |
6.Instructions
6.1. Measurement steps
6.1.1 The battery is installed.
6.1.2 Hold the handle of the meter and point the infrared sensor at the object
to be measured, distance 3-5cm. Hold the measurement switch,The meter
emits a "drop"; indicating that the meter is finished measuring.
6.1.3Release the measurement switch to read the temperature of the measured object.
Measurement Note: If the ambient temperature of the thermometer changes
drastically, it will affect the accuracy of the thermometer Temperature, wait
10 to 20 minutes at the new ambient temperature before measuring). When
measuring, make sure Keep your hair away and dry your sweat
7. Battery replacement
7.1 When the battery power is low, the LCD screen will display
7.2 At this time, the instrument needs an updated 7th battery.
7.3 Open the battery cover, take out the old battery, put in a new AAA battery,
and close the battery cover as it is.
8. Product keeper
8.1 Regularly wipe the meter with a dry cotton cloth. Never use any solvent to clean it.
8.2 Product must be serviced by professionals
8.3 Never put the instrument in water
8.4 Do not store in high temperature and high humidity environments.
9. Common problem
9.1 The LCD shows "HI"analysts and the measured value exceeds the
measurement range, that is, it exceeds 42.5 °C / 108.5°F in "BODV" mode, and
exceeds 265°C / 509°F in "SCAN" mode.
9.2 The LCD displays "LO"analysis, and the measured valve is beyond the
measurement range, that is, below 32°C / 0°F in "BODV" mode .Below -50 °C/
-48°F in "SCAN" mode.